Part Number Hot Search : 
CLL4756A SMAJ75A SC259609 LT18T PTZ39 PTZ39 FST10 805SF
Product Description
Full Text Search
 

To Download DB105-C-S-NTC Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere
FEATURES
* * * * * * * *
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER
DB101 THRU DB107
Good for automation insertion Surge overload rating - 30 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device Polarity symbols molded on body Mounting position: Any Weight: 1.0 gram
.255 (6.5) .245 (6.2) .350 (8.9) .300 (7.6)
DB-1
MECHANICAL DATA
* Epoxy: Device has UL flammability classification 94V-O * UL listed under the recognized component directory, file #E94233.
.335 (8.8) .320 (7.8) .135 (3.4) .115 (2.9) .165 (4.2) .020 (0.5) .205 (5.2) .195 (5.0) .060 (1.5) .155 (3.9)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25oC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Forward Output Current at T A = 40 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) CHARACTERISTICS Maximum Forward Voltage Drop per Bridge Element at 1.0A DC Maximum Reverse Current at Rated DC Blocking Voltage per element @T A = 25 C @T A = 125 o C
o o
SYMBOL VRRM VRMS VDC IO I FSM R qJA RqJL TJ,TSTG
DB101 50 35 50
DB102 100 70 100
DB103 200 140 200
DB104 400 280 400 1.0 40 40 15 -55 to + 150
DB105 600 420 600
DB106 800 560 800
DB107 1000 700 1000
UNITS Volts Volts Volts Amps Amps C/W
0
0
C
SYMBOL VF IR
DB101
DB102
DB103
DB104 1.1 5.0 0.5
DB105
DB106
DB107
UNITS Volts mAmps mAmps 2008-11 REV: A
Note: 1."Fully ROHS compliant","100% Sn plating(Pb-free). 2. Thermal Resistance: PCB mounted.
RATING AND CHARACTERISTICS CURVES ( DB101 THRU DB107 )
8.3mS Single Half Sine-Wave JEDEC Method
50 40 30 20 10 0 0 2 4 6
INSTANTANEOUS FORWARD CURRENT, (A)
PEAK FORWARD SURGE CURRENT, (A)
60
10
1
0.1
T J = 25 OC Pulse Width = 300mS 1% Duty Cycle
10
20
40
60
100
0.01
0
0.5
1.0
1.5
2.0
2.5
NUMBER OF CYCLES AT 60Hz
INSTANTANEOUS FORWARD VOLTAGE, (V)
INSTANTANEOUS REVERSE CURRENT, (uA)
1000
FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
AVERAGE FORWARD CURRENT, (A)
1.5
FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
TA = 125 OC
1.0
100
10
TA = 25 OC
0.5
60 Hz RESISTIVE OR INDUCTIVE LOAD
1.0 0
20
40
60
80
100
120
140
0 20
40
60
80
100
120
140 150
PERCENT RATED PEAK REVERSE VOLTAGE, (%)
AMBIENT TEMPERATURE, (OC)
FIG.3 TYPICAL REVERSE CHARACTERISTICS
FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE
THE MARKING OF DB10X
Marking on the body:
Part No.
DB10X
VXXX
Year Code Week Code
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.


▲Up To Search▲   

 
Price & Availability of DB105-C-S-NTC

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X